100W IP66 Philips LED LED Street Light
Basic Info
Model No.: 100W LED Street Light
Product Description
100W IP66 Philips LED LED Street Light
Highway, street, garden, district etc outdoor need illumination. Our 2018 new promote LED Street Light can meet your demand. It has 100~110lm/w lumen output, bright enough. As for the waterproof, adopt waterproof rubber ring to seal technology, IP grade arrive IP66.
Product Parameter
Model NO.AD-LD-100W1(HLG) | |
Wattage | 100W |
Voltage | AC 85-305V 50/60HZ |
Luminance Flux | 100-110lm/w |
THD | <10% |
Life Time | 50000 Hours |
Housing Size | 566*290*97mm |
Chip Brand | Philips |
Driver | MEANWELL HLG-100H-48A |
CRI | >75Ra |
CCT | 2700-6000K(Warm White, Pure White, Cool White) |
Beam Angle | 140°* 60° |
Warranty | 5 years |
Welcome to contact us to know more details of LED Lights.LED TUbe Light,LED Street Light,LED Flood Light,etc. |
Product Advantages:
LED Street Light
1.Environment friendly
2.Philips 3030 LED, high efficiency
3,Aluminum heat sink, Good dissipation
4,Wide input voltage.
5,High transmittance lens
6, Front designed driver,maintain conveniently
7, Treated by a new technology, housing is colorfast.
8,>50,000 hours using life span
9, 5 years warranty, super low maintenance cost.
Product Show
Install Caution
Please carefully read the operating instructions before using the products.
Please cut off the power supply before installation.
1, Open the packing, take out the lamp, open the power cover, and unscrew the M10 screw on the bracket, as shown in the picture:
2, Insert the pole into the lamp and lock the screws on both sides of the lamp. Fix the lamps on the pole. Connect the cable with the city electricity, pay attention to the distinction between the fire line, the zero light and the ground wire (the electric power should be cut off in advance when the connection is connected) as shown in the picture.
3, Close the driver cover
Application
Highway,Garden,Road, Community,District, Square, outdoor,etc.
Product Categories : LED Street Light > LED Street Light