Strain Clamps For Insulated Cable
Basic Info
Model No.: NX
Product Description
Strain Clamps For Insulated Cable
The strain clamp 1KV insulated wire
This series of products are mainly used in the voltage rating of 1KV and below power overhead insulated line. When the installation is not peeling wire insulation layer,and using the wedge clamping mechanism directly hold insulated wire,wire clip using tension bearing of insulated conductors.
Catalog No. | Applicable Wire Type | Conductor Diameter (MM) | Grip (KN) |
NX-35LY | JKLYJ-35 | 9.8 | 3.4 |
NX-50LY | JKLYJ-50 | 11.2 | 4.6 |
NX-70LY | JKLYJ-70 | 12.8 | 6.7 |
NX-95LY | JKLYJ-95 | 14.8 | 8.9 |
NX-120LY | JKLYJ-120 | 16.2 | 11.3 |
NX-150LY | JKLYJ-150 | 18.2 | 13.6 |
NX-185LY | JKLYJ-185 | 20.2 | 17.3 |
NX-240LY | JKLYJ-240 | 22.6 | 22.5 |
The strain clamp 10KV insulated wire
This series of products are mainly used in the voltage rating of 10KV and below power overhead insulated line. When the installation is not peeling wire insulation layer, and using the wedge clamping mechanism directly hold insulated wire, wire clip using tension bearing of insulated conductors.
Catalog No. | Applicable Wire Type | Conductor Diameter (MM) | Grip (KN) |
NX-35LY-10 | JKLYJ-35-10 | 15.8 | 3.4 |
NX-50LY-10 | JKLYJ-50-10 | 17.1 | 4.6 |
NX-70LY-10 | JKLYJ-70-10 | 18.8 | 6.7 |
NX-95LY-10 | JKLYJ-95-10 | 20.4 | 8.9 |
NX-120LY-10 | JKLYJ-120-10 | 21.8 | 11.3 |
NX-150LY-10 | JKLYJ-150-10 | 23.4 | 13.6 |
NX-185LY-10 | JKLYJ-185-10 | 25.0 | 17.3 |
NX-240LY-10 | JKLYJ-240-10 | 27.2 | 22.5 |
The strain clamp 20KV insulated wire
This series of products are mainly used in the voltage rating of 20KV and below power overhead insulated line. When the installation is not peeling wire insulation layer, and using the wedge clamping mechanism directly hold insulated wire, wire clip using tension bearing of insulated conductors.
Catalog No. | Applicable Wire Type | Conductor Diameter (MM) | Grip (KN) |
NX-35LY-20 | JKLYJ-35-20 | 20.0 | 3.4 |
NX-50LY-20 | JKLYJ-50-20 | 21.3 | 4.6 |
NX-70LY-20 | JKLYJ-70-20 | 23.0 | 6.7 |
NX-95LY-20 | JKLYJ-95-20 | 24.6 | 8.9 |
NX-120LY-20 | JKLYJ-120-20 | 26.0 | 11.3 |
NX-150LY-20 | JKLYJ-150-20 | 27.6 | 13.6 |
NX-185LY-20 | JKLYJ-185-20 | 29.2 | 17.3 |
NX-240LY-20 | JKLYJ-240-20 | 31.4 | 22.5 |
Our Factory
Jiangsu Chuandu Electrical Technology Co.,ltd is specialized in Electric Power fitting for 18 years.The company was founded in 1999 with the registered capital reaching RMB 100 million, covers an area of 41000 ㎡.The company is a technology-based manufacturing-type enterprise which mainly produces and sells electrical fittings of various specifications and types for high and low voltage transmission and power stations. Our products covering: Suspension Clamp; Strain Clamp; Link fitting; Protective Fitting; Preformed Fitting; Splicing Fitting; Cable Terminal, etc.
Manufacturing Workshop
Product Categories : Distribution Fitting