Find 10kv Aerial Insulater Cable, Aerial Insulated Cable, Overhead Power Cables on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Aerial Insulated Cables > 10KV Aerial Insulater Cable > 10KV 3 Cores Armoured Electrical Cable XLPE Cable,PVC Cable

10KV 3 Cores Armoured Electrical Cable XLPE Cable,PVC Cable

Product Description






10kv XLPE/PVE Armoured Electrical Cable







Power Cable Suppliers










Application


PVC/XLPE Power Cable is used to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper Insulated Power Cable and in partial replace of PVC Insulated Power Cable.







Standards


The Power Cable is mainly complying with IEC60502,GB/T 12706 standards.It also can be produced according to OEM requirements and other standards, such as BS, DIN, ASTM, VDE, NFC standards, and so on.







Production range


Single core cable: from 1.5 mm2 to 800 mm2 ,


Multi-cores cable: from 1.5 mm2 to 400 mm2 .




















Properties of PVC Power Cable





1.The long-time permissible working temperature of cable conductive core is not more than 70 degrees.


2.During short circuit (max permanent time is not more than 5 seconds), the max temperature of cable conductor is not more than 165°C.3.The difference level of laying cable is not restricted.When laying the cable,ambient temperature is not lower than 0°C.4.They have good chemical stability,and properties of acid resistance,alkali resistance,salt resistance,oil resistance,solvent resistance and flame resistance.







Properties of XLPE Power Cable


1.The highest allowed operating temperature of conductor for long-term working is 90 degrees.


2.In short circuit (Max long term is no more than 5 seconds). The highest temperature for conductor is no more than 250 degrees.


3.The cable is laid without horizontal drop limit. The environment temperature should be no lower than 0 when lay. Otherwise it should be preheated.


4.Excellent electrical performance, resistance to chemical corrosion.


5.Can stand advisable traction when laid.Can stand traction from Outside.Left low smoke halogen-free after burned.Retard the burning of the cable.







Operating characteristics


1. long time operating temperature for cable conductor is 90 degrees.


2. the highest temperature of the conductor in short circuit (no longer than 5 seconds) in not more than 250 degrees,


if a joint is in the cable, the temperature of the tinning welding joint is not more than 120 degrees, compressing joint not more than 150 degrees and electro- welding joint not more than 250 degrees.


3. no drop in limited provided there is full mechanical tention when cable is laid. It si forbidden to lay cable in iron-pipe or to fix cable by circling around the cable with iron materials.


4. being laid, the minimum temperature of the cable shall not be lower than zero degree. In the case of lower temperature, heating measures shall be taken.
















Specification

Type

Description

Application n

Cu

Al

YJV

YJLV

XLPE insulation PVC sheath power cable

To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside

YJY

YJLY

XLPE insulation PE sheath power cable

YJV22

YJLV22

XLPE insulation, steel tape armor, PVC sheath power cable

To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force.

YJV23

YJLV23

XLPE insulation, steel tape armor, PE sheath power cable

YJV62

YJLV62

XLPE insulation, have no the magnetism steel tape armor, PE sheath power cable

YJV32

YJLV32

XLPE insulation, thin steel-wire armor, PVC sheath power cable

Be applicable to the well, water inside and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint

.

YJV72

YJLV72

XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable

YJV42

YJLV42

XLPE insulation, thick steel-wire armor, PVC sheath power cable

Be applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.



Copper Cable Types









Note: The armored single core cables is only used for D.C.system. As for A.C.system,non-magnetic armored material should be applied.






10kv XLPE/PVE Armoured Electrical Cable


Power Cable Types










Power Cable Manufacturers


Pakage of Power Cable


Color of Electrical Wire


Power Cable Company








10kv XLPE/PVE Armoured Electrical Cable













Contact us if you need more details on 10kv Electrical Cable. We are ready to answer your questions on packaging, logistics, certification or any other aspects about XLPE / PVC Electric Cable、10kv Armoured Cable. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Aerial Insulated Cables > 10KV Aerial Insulater Cable